Limit Switch

Product Description

• Model NO. i10-E0313S02 Number of positive action N/C solenoid monitoring contacts	2
  Number of N/O solenoid monitoring contacts	0
  Number of positive action N/C door monitoring contacts	1
  Number of N/O door monitoring contacts	1
  Number of N/C door monitoring contacts	0
  Locking force Fmax 1,300 N (EN ISO 14119) With straight actuator EN ISO 14119 With angled actuator EN ISO 14119 With hinged actuator EN ISO 14119
  Locking force FZh 1,000 N (EN ISO 14119)
  Actuation force	10 N
  Actuation frequency	7,000 /h
  Actuation directions	4
  Approach speed	20 m/min

• SAFETY-RELATED PARAMETERS

  B10d parameter	3 x 106 switching cycles (with small load)
  Type	Type 2 (EN ISO 14119)
  Actuator coding level	Low coding level (EN ISO 14119)
  Safe state in the event of a fault	The switch has no internal fault detection and is unable to assume a safe state in the event of a fault. Fault detection is performed by the connected safety-related logic unit.

• INTERFACES

  Connection type Cable gland, 3 x M20 Conductor cross-section 0.34 mm² ... 1.5 mm²

• ELECTRICAL DATA

  Contamination rating	3
  Switching principle	Slow action switching element
  Usage category	AC-15/DC-13 (IEC 60947-5-1)
  Rated operating current (voltage)	4 A (230 V AC) 4 A (24 V DC)
  Rated insulation voltage Ui	250 V
  Rated impulse withstand voltage Uimp	2,500 V
  Type of output	Electro-mechanical contacts
  Power consumption	8 W
  Short-circuit protection	4 A gG
  Switching voltage	12 V DC
  Switching current (switching voltage)	1 mA (24 V DC)
  Solenoid operating voltage	(20.4 V DC ... 26.4 V DC)
  Switch-on time of magnet	100 %
  Locking principle	Power to lock

• MECHANICAL DATA

  Weight	0.46 kg
  Housing material	Glass-fiber reinforced thermoplastic
  Mechanical life	1 x 106 switching cycles

• AMBIENT DATA

  Enclosure rating	IP67 (IEC 60529)
  Ambient operating temperature	20 C ... +55 °C
  Storage temperature	20 °C ... +55 °C